The HRS2000-BT design adopts a high-resolution optical-mechanical platform and uses Hamamatsu S16010 (S11510) 2048×64 pixels back-thinned CCD, which enables the best optical resolution to reach 0.1nm, while the signal-to-noise ratio is increased to 800:1. The dynamic range has been increased to 50000:1 and the sensitivity in the 700-1100nm range has been improved. Therefore, this series of spectrometers is very suitable for Raman spectrum measurement and near-infrared laser spectrum analysis. In addition, this series of spectrometers can obtain different spectral ranges and optical resolutions by configuring gratings with different number of lines and different slits, providing a wealth of choices for scientific research and industrial testing customers.
The small size is also very suitable for system integration.
With its lightweight size, the spectrometer is ideal for system integration.
| Model | HRS2000-BT |
|---|---|
| Dimension | 140mm×110mm×46mm |
| Detector Wavelength Range | 200 nm-1100 nm |
| Optical System Wavelength Range | Determined by the grating |
| Optical Resolution | Up to ~0.1nm (determined by the grating and slit) |
| Fiber Connector | SMA905 |
| Detector | Hamamatsu S11510 area array back-illuminated CCD |
| Pixel | 2048×64 pixels, pixel size 14µm×14µm |
| Signal to Noise Ratio | 800:01:00 |
| Linearity | >99% |
| Stray light | <0.1%（600nm） |
| A/D resolution | 16bit |
| Integration Time | 1ms-10s |
| Dynamic Range | 50000:1 (typical value) |
| Triggers | Software trigger, hardware trigger, synchronous trigger |
| Power Consumption | 5VDC ,500mA |
| Operating Temperature | 5℃-35℃ (recommended temperature 25℃) |
| Communication Interface | USB2.0, RS232/RS422 |
| Operating System | Win XP, Win 7, Win 8, Win10 |
| Power Supply | USB |
| Model | Wavelength Range | Resolution | Slit | Grating | Filter | Lens |
|---|---|---|---|---|---|---|
| HRS2000-BT | 800-1000nm | ~0.2nm | 5um | 1200g/mm,1000nm | F08 | L01 |
| 670-1100nm | ~0.3nm | 5um | 600g/mm,1000nm | F08 | L01 |
